DeAGNOSTINI MODEL SPACE Red Bull Racing RB7 Build Manual page 31

Red Bull Racing RB7: Step by Step
23
Next, place the right front wing
endplate wing into position, as
shown, then insert and tighten another
2 x 6mm countersunk screw to secure it.
26
Cut the second TOTAL sticker
(also numbered 14) from the
sheet, and apply it to the left side of the
front wing.
24
Repeat Step 23 for the left front
wing endplate wing.
27
This stage is now complete, and your RB7's running body front wing is nearing
completion. Store this part safely away until next time.
514
25
Next, cut out the first TOTAL
sticker (number 14) and apply it
to the right side of the front wing,
as shown.
™