Advertisement
Red Bull Racing RB7: Step by Step
19
Remove and de-burr the mirrors.
22
Remove the rear light from the
moulding and carefully de-burr
the part.
20
Clean and prime the mirrors,
then spray them with silver paint.
This time, you need only paint the front,
smooth sides. Set them aside to dry.
23
Dab some glue onto the reverse
of the rear light, and set it into
the square hole at the rear of the chassis.
503
21
Dab some adhesive into the
recesses of the side mirrors, then
use needle-nose pliers to insert the
painted mirrors, with the painted sides
facing outwards. Press the parts into
place and allow to dry.
24
Remove the pitot tube from the
sprue and de-burr it.
™
Advertisement
