Advertisement
Red Bull Racing RB7: Step by Step
06
Apply the sticker, as shown, onto
the right side of the front wing.
Make sure that no bubbles or creases
appear in the sticker's surface, and that
the curved cutaway section in the 'e' of
the sticker fits neatly around the raised
section of the wing, marked by the
green arrow.
09
Now cut out sticker 1. Again,
make sure you trim this exactly
as the dotted green line shows.
07
Next, cut around the marked
edge of sticker 3. Again, this will
require precision.
10
Now apply this sticker to the
upper portion of the front
wing, as shown. Make sure that all the
indented sections fit as directed around
the wing's raised sections.
511
08
Apply this sticker to the section
directly above the one placed
in Step 06. Again, be very careful to
position the sticker exactly as it is shown
in the photo, with the two curved
indented sections fitting neatly around
the wing's raised sections (green arrows).
11
To complete the right side of the
front wing, cut around the sticker
numbered 2.
™
Advertisement
