Advertisement
Red Bull Racing RB7: Step by Step
06
To mount the side mirrors, dab a small amount of modelling adhesive into the two
holes at the front edges of the display body's cockpit (see red arrow and circle),
then place the mirrors into these, as shown.
08
Optional: for the ultimate finish,
you may choose to add some
colour to the steering wheel's controls. If
so, follow the photo above for guidance.
09
Lower the steering wheel into
the holes inside the cockpit
indicated by the red arrows. You do not
need to glue the part in place just yet.
495
07
The next stage is to prepare the
steering wheel. Place it on a
covered surface and spray it evenly with
suitable black paint, making sure you
cover it from all sides. Wait for the paint
to dry before proceeding.
10
Your assembly should look like
this. This phase is complete for
the time being, so set your display body
safely to one side.
™
Advertisement
