YASKAWA DX200 Instructions Manual page 26

Pendant Oscilloscope
Function
2 Setting and Operation for Data Measurement
2.3 Setting Measurement Conditions
Fig. 2-12 shows the typical display example when the option {Alarm} is
selected as TrigType.
Fig. 2-12: Trigger Setting Panel (Alarm Trigger)
 AlarmNo
Selecting {Alarm} as the trigger type switches {Level} turns to an entry
box of {AlarmNo}. Input a valid alarm number here. When a non-
existent alarm number is specified, an error occurs when the
measurement starts.
For details of alarm number, refer to "DX200 Maintenance manual
(165293-1CD)".
Major alarms, when occur, may contain abnormal data
transmission between the controller hardware, and a
normal operation of pendant oscilloscope cannot be
NOTE
guaranteed.
It is recommended that the target alarm number as the
alarm trigger should be Minor or User alarms rather than
Major alarms.
2-14
165467-1CD
HW1481803
26 of 48