Appendix Ii : Quick Start Guide - Bodet Sigma C Installation And Operating Instructions Manual

Appendix II : quick start guide

Enablinge/disablinge the circuit
- Press the key.
- The first circuit will be displayed.
- Repeatedly press the
- The circuit mode will flash.
- Select the desired mode with the
- Press the
Start: enable circuit.
Stop: disable circuit.
Status: check circuit status.
Delete: erase existing schedule.
Prog: program schedule (create/modify/delete an event).
Display: scan existing schedule.
Test circuits
- Press the
- The first circuit will be displayed.
- Repeatedly press the
- Press briefly the
- Hold down the
TEST mode.
- Press briefly the
Program a holiday or special day period
- Press the
- Select Holidays or Special day with the
- Press the
- Enter the start and end dates and select application to all the circuits, the desired circuits
or all except the desired circuits.
To program several holiday periods, use the PC software provided with the master clock.
Access the user menu by pressing the
44
key to select the desired circuit.
key to validate.
key.
key to select the desired circuit.
key to test shortly the circuit.
key to maintain the circuit activation and enter in the FORCED
key to exit the FORCED TEST mode and deactivate the circuit.
key.
key.
© 2017 BODET SA. All rights reserved.
or key.
or key.
key, to refer to the full record.