Electrical Connections - Bodet Sigma C Installation And Operating Instructions Manual

4.2 Electrical connections

4.2.1 Wall mounted version
1/ Connect the cables to the corresponding terminal strips as shown in the figure
110-
230VAC
Meaning of status of LEDs on a RJ45 connector :
- The green LED reflects network activity.
The yellow LED indicates the speed of the network:
off=10 Mbps on=100 Mbps.
4.2.2 Rack 19'' version
The connectors are directly accessible at the rear of the Rack unit.
10
See the limit
characteristics of
these circuits on
page 40
Attach the wires to each other, near
the terminal strips.
below.