Table of Contents
Advertisement
To load a Program in the master clock :
1/ Validate the option with the
The master clock will search for the files available on the
key (.sig extension).
2/ Select the file to be loaded using the
3/ Validate with the
The loading is then carried out. When it is completed, the
unit displays :
To back up the existing Program of the master clock :
1/ Validate the option with the
The master clock saves the file with an automatically
allocated name in the format: save1_DD_MM.sig (The
number (1, etc.) and the date are incremented automatically).
It is possible to rename this file from the PC, while
keeping the same ".sig" extension.
Once the backup is completed, the unit displays:
7.2.2 Add DHF receivers
To place the master clock in "DHF initialisation" mode and
enable synchronisation of new equipment :
1/ Validate the initialisation mode with the
The following screen is displayed :
2/ Select the "ACTIVE" mode using the
and validate with the
The "init" display mode will appear alternately with the normal display during this period (4 hours).
It is possible, once the receivers are DHF initialized, to stop this mode in this menu.
7.2.3 Bank holidays
Bank holidays saved via the PC software (maximum 20 dates) are managed by master clock.
By default, French bank holidays are active.
Bank holidays can be added and configured through the
PC software.
Validate the option with the
The following screen is displayed:
Choose YES / NO to activate the bank holidays calendar.
Bank holidays will be considered to be Sundays (the
weekly programming for Sundays will be used on bank
holidays).
key.
key.
key.
key.
key.
Restore: Nest01.02 ú
Confirm ok
and
keys.
Transfer completed
Remove USB key
Create backup
Confirm ok
Transfer completed
Remove USB key
Add DHF receivers ok
Bank Holidays
key.
Init mode: ACTIVE
Add receivers
and
keys
Bank Holidays
Access code
Bank Holidays : Yes
Sunday prog activated ok
exit C
exit C
õ
ú
ok
ok
õ
ú
17
Hide quick links:
Advertisement
Table of Contents
