Table of Contents
Advertisement
7.2.4 Access code
To enter or remove the master clock access code :
1/ Validate the option with the
The following screen is displayed :
2/ Choose the option you require and validate it with the
key.
The access code is fixed,
If there are 3 attempts with the wrong access code, an alarm message appears. The keyboard is
locked for 10 minutes. It is possible to unlock it from the technician menu.
7.2.5 Time and date
To change the time or the date of the master clock :
1/ Validate the option with the
The following screen is displayed :
2/ You have access to the time zone selection.
The time zone selection allows you to automatically
manage winter/summer time changeovers.
If the zone is not available in the 20 pre-programmed towns
or time zones, select "PROG" mode which is programmed
in the technician menu.
3/ "PROG" mode allows you to configure personalised time zone differences and time
changeovers.
By default it is in "PROG" mode.
4/ The hour is flashing: set the hour using the
keys and move on to the minutes with the
5/ Proceed in the same way for the date.
6/ Validate with the
18
key.
,
,
,
key.
key. If the time has been changed, the seconds are reset to 0.
Access code
Time and date
Access code: Yes
.
Time and date
Dynamic reception
Time zone : LONDON ú
(GMT + 00:00)
Time zone :PROG
(GMT)
and
Time 10:12:00
key.
Date 08/09/14
ok
õ
ú
ok
ok
õ
ok
ú
ok
ú
ok
Hide quick links:
Advertisement
Table of Contents
