Ip Configuration Menu - Bodet Sigma C Installation And Operating Instructions Manual

11.3 IP configuration menu

This menu is used to configure the IP parameters of the master clock.
To enter the master clock IP configuration menu, validate
the option in the technician menu with the
The following screen is displayed :
If DHCP =YES, then it is the network's DHCP server which
1
gives the product its IP parameters.
If you wish to give the Sigma C a fixed address, validate this option (set to No) with the
key.
The following screen is displayed:
Enter the IP address and then validate.
The following screen is displayed:
Enter the sub-network mask and then validate.
The following screen is displayed:
Enter the address of the gateway and validate the option in
the technician menu with the
This data is neither saved nor present in the printing.
After validation, the master clock restarts automatically to take into account the DHCP
changes.
1 Dynamic Host Configuration Protocol (DHCP) is a term designating a network protocol which carries
out an automatic configuration of the IP parameters of a station, notably by automatically assigning it an
30
IP address and a sub-network mask.
key.
key,
IP setting
Relay setting
DHCP : No
IP Address fixed ok
IP Address :
---.---.---.---
Subnet Mask
---.---.---.---
Gateway :
---.---.---.---
ok
õ
ú
ú
ok
ú
ok
ú
ok