Xv - Technical Characteristics - Bodet Sigma C Installation And Operating Instructions Manual

XV - Technical characteristics

Designation
Backup
Time base
Capacity
Power supply
Maximum consumption
Power supply terminal block
Other terminals
Electrical isolation
Mains power supply system
Control of 3 relays
Control circuit (relay)
isolation
Circuit operating voltage
Relay breaking capacity
Usefulness of indicator light
(of each circuit)
Relay statuses
Synchronisation
Protection index
Operating temperature
Keypad locking
Dimensions
Weight
* SELV: safety extra low voltage (voltage < 42.4 V peak or 60 V continuous).
**LV: low voltage > 42.4 V peak or 60 V continuous.
40
Permanent backup of all parameters in case of mains failure. Automatic
resetting of receiver clocks to correct time after mains restoration.
Quartz, accuracy 0.1 seconds per day between 20 and 25°.
500 program steps per circuit.
100-240 VAC 50/60 Hz
100-240 VAC ; 0,8-0,55 A.
Rack: rigid or flexible cable with end piece with cross section 1² to 1.5²
Wall-mounted: rigid wire 1² to 1.5² bared 6 mm.
Cross section 1.5² maximum, bared 6 mm.
Class 1.
TT or TN system.
Programmable in weekly or annual mode
Galvanic isolation.
Either SELV* or LV** with common phase (230 V maximum between
the 2 circuits).
1A / 240 VAC.
1) Lit when contact closed.
2) Used to indicate the current circuit programming.
Standby/work on circuit 3.
Normally open on circuits 1 and 2.
Depending on model, on DCF, MSF or GPS antenna.
Wall-mounted : IP41 / Rack : IP 20
0 to 50°C
By access code
WALL-MOUNTED version
Width 220 mm
Height 322 mm
Depth 83 mm
1.2 kg
Characteristics
19» RACK Version
483 mm (1 width)
44 mm (1 U)
200 mm
1.4 kg