Table of Contents

Advertisement

Tether Anchor Loop
(Located on floor directly behind the
forward facing dinette seat)
Tether Anchor Loop
(Located behind the forward facing
dinette seat back cushion)
NOTE: The dinette table must be in the lowered
position when a child seat is in use.
DRIVING YOUR MOTORHOME
2
1. Lower the dinette table.
2. Hook the Tether to the Anchor Loop. Pull
tether strap to tighten.
3. Fasten the lap belt and pull snug.
-Typical View,
(Your coach may differ in appearance)
Further Information
See the child seat manufacturer's specific
instructions for proper attachment and
adjustment of the tether and seat belts.

KEYS

Your motorhome is supplied with several
keys. In addition to the chassis manufacturer's
ignition key, you receive keys for the entrance
door and exterior compartment doors.
Keys have an identification number, either a
small metal tag or stamped into the key head.
These numbers are recorded on the vehicle's
component model/serial sheet, which is included
in your InfoCase. In case keys are lost or stolen,
your dealer or a locksmith can provide you with
duplicate keys or modify the locks.
REMOTE KEYLESS ENTRY
The Remote Keyless Entry system on the cab
doors is chassis-supplied. However, we have also
connected the coach entry door lock to this
system. This means your keyless remote
transmitter will lock and unlock the entry door as
well as the cab doors.
SECTION 3 –
1
3
3-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

View 24gView 24vView 24j

Table of Contents