Table of Contents
Advertisement
REGISTRATION (cont.)
De-register Handset
Handset 1
Y25
Menu
Contact
KEY_SOFT_1
Registration
<< Icon >>
Y26
Select
Back
KEY_SOFT_1
Registration
Register Handset
Select Base
De-register
Y27
Select
Back
KEY_DOWN
Registration
Register Handset
Select Base
De-register
Y28
Select
Back
KEY_SOFT_1
De-register
Enter System PIN:
Y29
OK
Back
De-register
Enter System PIN:
****
Y30
OK
Clear
KEY_SOFT_1
De-register
Handset 2
Handset 3
Handset 4
Y31
Select
Back
KEY_SOFT_1
De-register
Handset 2
Handset 3
Handset 4
Y32
Select
Back
1 .
P ress and hold down KEY_PAGE for 3 seconds to put the base in subscription m od e , the
subscription period is offered for 1 minute. The Power In Use / Event LED on the base f la s h e s
for the duration of the registration period.
2 .
When registering a handset - all base numbers are presented on the select base screen (see
screen Y3 a n d Y 1 2 ) .
"
(In
Use)" is appended to the base number currently in use.
KEY_UP
3 .
If user select a base already in use - the display prompts
base number (see screen Y13) and the registration is overwritten with the new one.
4 .
When an additional handset is first powered up,
place of the handset name and number (see screen Y0). The range icon (if enabled) also
flash e s .
5 .
If registration process failed (e.g, if wrong system PIN was entered) - the display prompts
"
Registration Unsuccessful
scr e e n Y 1 4 ) .
6 .
If there are already 5 handsets registered to the base, the registration will fail and the display
will prompt
screen (see s c r e e n Y 1 4 ) .
7 .
When de-registering a handset - all registered handsets accept the one being used are offered
(see scr e e n Y 3 1 ) .
8 .
When de-registering a handset if wrong system PIN is entered - the display prompts
System PIN
can retry.
9 .
To stop the registration process at any time press
1 0 . When a handset is unregistered - the user can access the handset
local to the handset
Registration).
1 1 . If any of the handsets are registered to another manufacturers or non compatible base, any
attempt to access functionality which is not local to the handset will result in the
Available" error message being presented.
De-register
Incorrect
System PIN !
Y36
Go to Y28
Y35
De-register
Handset 4
De-registered
Y34
KEY_SOFT_1
De-register
KEY_SOFT_1
De-register
Handset 4 ?
Y33
Yes
!" along with a warning tone and returns to the idle screen (see
"Registration Unsuccessful
!" along with a warning tone and returns to the idle
!" along with an error tone and return to "Enter System PIN" screen so the user
(Calls
List,
Set
Handset,
KEY_SOFT_1
No
"Replace Base X
"Please
register" is flashing on the display in
Back
(KE Y _ SO F T _ 2 ) or K E Y _ E N D .
Contact
Clock &
Alarm, Reminders,
Useful Numbers
?" where X is the
"Incorrect
list, and functions
and
"Not
Advertisement
Table of Contents
