Table of Contents
Advertisement
PAGING CALL
Handset
1
Paging Call
G5
Stop
1 .
To locate a missing handset p r e s s K E Y _ P AG E on t h e b a s e
- all handsets will ring and the display will prompt
Call".
2 .
To cancel the paging request - pres s K E Y _ P AG E a g a in on
the base.
3 .
To stop the paging call - press
key on the handset. All handsets will stop ringing and the
displays will revert to idle.
KEYPAD LOCK
Keypad Locked
G6
Press # to
Unlock Keys
G8
1 .
To activate keypad lock, press and hold K E Y _ H ASH - t h e
display prompts
"Keypad
confirmation tone (see screen G6) .
2 .
When keypad lock is activated, the idle screen is
presented with a small key icon on the dashboard with
Unlock
on KEY_SOFT_1 ( s e e s c r e e n G 7 ) .
3 .
To deactivate keypad lock, pr e s s
the display prompts
"Press # to Unlock
G8 ) .
If KEY_HASH is not pressed within 2 s e c on d s - t h e
display returns to idle screen (screen G7) .
If KEY_HASH is pressed within 2 s e c on d s - t h e d is p la y
prompts
"Keypad
Unlocked" (see screen G9) and return s
to idle screen with small key icon removed from the
dashboard .
4 .
Incoming calls can still be answered when keypad loc k is
activated, either by lifting the handset from the base (if
Auto Talk
is set to ON) or pres s in g K E Y _ T AL K .
The user can interact with the in-call functionality as
normal, e.g.,
Quite
option during incoming ringing,
phonebook access during call. Once the call is e n d e d a n d
the idle screen is presented again, keypad lock is re-
activa t e d .
5 .
Alarm can also be stopped when keypad loc k is activa t e d .
Once the alarm is stopped and the idle screen is
presented again, keypad lock is re-activat e d .
6 .
Emergency Calls can be made when the keylock is on .
Up to 3 emergency number can be stored in the eeprom,
each with maximum 6 digits.
"Paging
Stop
(KEY_SOF T _ 1 ) or a n y
Handset
1
G7
Unlock
Keypad Unlocked
G9
Locked" along with a
Unlock
( K E Y _ SO F T _ 1 ) -
Keys" (see s c r e e n
SCREENSAVER
12:00
Jan 0 1
G10
1 .
When Screensaver is set to
together with the time and date are displayed (see screen
G10). The screensaver will come on when t he s c r e e n
backlight times out (depending on the time set for light
timeout under handset settings).
2 .
Screensa v e r s h o uld only come on in idle mode not during
the call.
3 .
Handset screen (with backlight) will reactive when the
handset is placed on the base and when it is removed from
the base.
4 .
The minute hand ticks approximately every two and a half
minute.
ALARM CLOCK
Handset
1
G11
Menu
Contact
1 .
When an alarm is set to ON, a small alarm clock icon will
appear on the dashboard in idle (see screen G11).
2 .
When the alarm sou n d s at the preset time (see screen
G12) - pre s s
Stop
( K E Y _ SO F T _ 1) to stop the alarm .
3 .
If no button is press the alarm will continue to sound for 1
minute.
4 .
If the alarm is set to on
disappear after the alarm is stopped or after the ringing
times out.
5 .
If the alarm is set to
On Daily
clock icon will stay on the dashboard after it is stopped or
after the ringing times out.
6 .
If the handset is off hook when the alarm is due - the small
alarm on the dash board will flash and a beep is played at
the handset earpiece .
Clock
- an analogue cloc k
Handset
1
Alarm
06:00 am
G12
Stop
Once
- the alarm clcok icon will
or on
Mon - Fri
- the alarm
Advertisement
Table of Contents
