Xact XD6451 User Manual page 13

BATTERY INDICATIONS
Handset 1
G0 Menu Contact
VOLUME INDICATIONS
Handset 1
Volume 5
G1 Mute Contact
Handset 1
G3 Name Contact
1 . Volume bars are presented whenever the in-call, receiver,
or ringer volume is changed (see screen G1 and G2).
2 . When changing your receiver volume during call, the first
press of the up or down navigation button presents the
volume bar on the display showing the current setting.
Subsequent presses change the setting. When th e
minimum or maximum setting is displayed, further presses
of the relevant navigation button are ignored.
3 . When the handset ringer volume is set to off - the display
prompts "Ringer Off" (see screen G2) and the ringer off
icon is displayed on the dashboard when the display
returns to the idle screen (see screen G3).
4 . When the base ringer volume is set to off - the display
prompts "Ringer Off" (see screen G2) but there will be no
indication on the idle screen.
OUT OF RANGE
Searching ...
G4 Menu Contact
1 . When a handset is out of range - the handset name and
number is replaced by "Searching
2 . In addition to "Searching
dashboard (if the range icon is enabled) will flash along
with an out of range / warning tone.
3 . When a handset is out of range - the user can access the
handset Contact list, and functions local to the hands e t
(Calls List, Set Handset,
Numbers and Registration).
If the user tries to access something that is resident on
the base (Set Base, Answering
the display will prompt "Not
with the error tone and returns to the previous screen.
Battery is fully charged
Battery is partially charge d
Battery is running low
Battery is almost dis c h a r g e d
Ringer Volume
Ringer Off
G2 Save Back
..." (see screen G 4 ) .
..." the range icon on the
Clock & Alarm, Reminders, Useful
Machine, Text Messaging),
available" for 2 seconds alon g
LED INDICATORS
LEDS
Handset
In Use / Ringing / Events
(Events: Missed Calls, SMS
VMWI, TAM Messages)
Note: Missed Calls can be
disabled
Base Power /In Use / Ringing /
Events
Note: Missed Calls and TAM
Messages can be disabled
TAM
Charging
* Same constant flashing rate for all events
DISPLAY CHARACTERISTICS
Display Size
Display Resolution
Colour
Number of Rows
Font Package
Characters (per rows)
HOT KEYS
ON-HOOK OFF-HOOK
Case 1
Case 2
Case 3
Note: A long press on KEY_1, 2 and 3 is dialled out in off or on hook
mode or both can be definded in EEPRO M .
LED State
In Use - Steady ON
Ringing - Flashing*
Events - Flashing*
Power - Steady On
In Use - Flashing*
Ringing - Flashing*
Events - Flashing*
New Messages - Flashing*
Answer On - Steady ON
HS on cradle - Steady ON
HS off cradle - OFF
Handset Display
1.4 inch
128*128 pixels
4K colour
5 lines + 1 line softkeys + 1 line dashboard
Copy 10_65
At least 16
ACTIONS
Long press during on- hook
will dial number stored.
Long/short press during calls
will dial 1.
Long press during off-ho ok
will dial number stored.
Subsequent long presses will
also dial the number stored.
Long presses will dial the
number stored whichever
mode it is in.