Table of Contents
Advertisement
WELCOME MODE
G13
Pays
France
UK (BT)
UK (Abc)
G14
Sélect.
Retour
1 .
A welcome mode is presented when a product is powered on for the first time and after a factory reset.
A welcome mode enables automatic configuration of the line interface, CLI, SMS and TAM parameters stored in EEPROM / f la s h w h e n
the user selects their country of origin and operator.
This feature can be hidden in E E P R O M .
2 .
A welcome screen (see screen G13) is presented for 5 seconds before user is asked to select a country (operat or ) .
3 .
On the selec t
Country
screen (see screen G14) as user scrolls through the country listing the menu title changes to the country
native language.
4 .
If
Back
(KEY_SOFT_2) is pressed any time during country selection - the handset will return to the welcome screen (screen G13 ) .
5 .
Once a country (operator) is selected. Both the handset and base will reset to enable correct settings. Further screens will be
presented in that country default language setting.
6 .
The end user has the possibility to change the display language in the handset menu without affecting the country settings.
7 .
User can make and receive calls withour first selecting the country and operator. However, the Welcome screen will re appear until
the phone has been configured with a country setting.
8 .
The timing of the Welcome screen re appearing when it is not set can be defined in EERPOM.
9 .
Once welcome mode is set on one handset - registering additional handset will not prompt the welcome screen. Once registered,
additional handset will communicate with the base to ensure correct settings is applied.
1 0 . If the language is changed after the Welcome mode has been set and another handset is registered - the handset language is not
changed but will take the default language set for the country selected.
Combiné
1
G16
Menu
Noms
Pays
KEY_SOFT_1
Réinit. terminée
G15
Advertisement
Table of Contents
