Xact XD6451 User Manual page 18

CALL HANDLING (cont.)
INTERNAL CALLS
To make an internal call:
1 . On your handset (handset 1), press K E Y _ I N T
followed by the handset number you want to call.
2 . P r e s s OK (KEY_SOFT_1), the call attempt is m a d e
immediate ly .
3 . " Internal Call Handset
where X is the called handset number, in this case
it is handset 2.
On hand s e t 1 :
Handset 1
Internal Call
Handset 2
D14 OK
KEY_SOFT_1
Handset 1
Internal Call
Handset 2
D15 Mute Contact
4 . To answer the call on handset 2, press K E Y _ T A L K .
5 . If you try to make an internal call to a handset which
is already engaged on an internal call, or is not
available, the handset will emit an error beep before
returning to the standby screen.
6 . If two handsets are engaged on an internal call and an
external call is received, any handsets that are
available will ring. The handsets involved in the
internal call will present beeps in the earpiece. The
caller information or name match to your local contact
list will be presented on all handset displays.
7 . The internal call must be ended before the external
call can be taken .
Once the internal call has ended the external call will
be presented on the handset again for the user to take
the external call.
TRANSFER CALLS
To transfer a call to another handset:
1 . On your handset (handset 1), p r e s s K E Y _ IN T
followed by the handset number you want to call.
2 . P r e s s OK (KEY_SOFT_1), the call attempt is m a d e
immediate ly .
Or press Back (KEY_SOFT_2) t o c a n c e l t h e c a ll
request .
3 . " Internal Call Handset
where X is the called handset number, in this case it
is handset 2 .
4 . To answer the call on handset 2, pres s K E Y _ T AL K .
5 . Once handset 2 has answered the call, the sof t k e y s
on handset 1 will change to
End ( K E Y _ SO F T _ 2 ) .
6 . If the user replaces the handset in the base/cradle,
both calls are ended. If the external call was an
incoming call, this will cause the call to be presented
(as an incoming call) again.
7 . To toggle between external and internal call on
handset 1, p r e s s K E Y _ IN T .
8 . To transfer the call to handset 2, on handset 1 press
End (KE Y _ SO F T _ 1 ) or K E Y _ E N D .
The call is transferred to handset 2.
X" is displayed on hand s e t 1
On hand s e t 2 :
Handset 2
Internal Call
Handset 1
D16 Quite
X" is displayed on hand s e t 1
Join (KE Y _ SO F T _ 1 ) a n d
On hand s e t 1 :
Handset 1
02074030201
00:12
D17 Mute Contact
KEY_INT
Handset 1
Internal Call
Handset 2
D18 OK End
KEY_SOFT_1
Handset 1
Internal Call
Handset 2
D19 End
Handset 1
Internal Call
Handset 2
D20 Join End
KEY_TALK KEY_SOFT_2
Handset 1
Call Duration
02:01
D21
9 . When a handset transfers a call to another handset,
the CLI or any contact name/number information from
the sending handset is transferred to the receiving
handset that is now controlling the external call.
KEY_2
On hand s e t 2 :
Handset 2
Internal Call
Handset 1
D22 Quite
KEY_TALK
Handset 2
Internal Call
Handset 1
D23 Mute Contact
When handset 1 ends
the call ...
Handset 2
02074030201
00:01
D24 Mute Contact