Xact XD6451 User Manual page 19

CALL HANDLING (cont.)
CONFERENCE CALLS
To start a conference ca ll:
1 . On your handset (handset 1), p r e s s K E Y _ IN T
followed by the handset number you want to call.
2 . P r e s s OK (KEY_SOFT_1), the call attempt is m a d e
immediate ly .
Or press Back (KEY_SOFT_2) t o c a n c e l t h e c a ll
request .
3 . " Internal Call Handset
where X is the called handset number, in this case it
is handset 2 .
4 . To answer the call on handset 2, pres s K E Y _ T AL K .
5 . Once handset 2 has answered the call, the sof t k e y s
on handset 1 will change to
End ( K E Y _ SO F T _ 2 ) .
6 . P r e s s Join (KEY_SOFT_1) or lon g p r e s s on
KEY_HASH on handset 1 to join the two calls.
Handset 1 will display "
call timer initiated from the first call (see screen
D 2 5 ) .
Handset 2 will display "
call timer initiated from the time the call is answered.
On hand s e t 1 :
Handset 1
Conference Call
02:34
D25 Mute Contact
X" is displayed on hand s e t 1
Join (KE Y _ SO F T _ 1 ) a n d
Conference Call" follow by the
Conference Call" follow by the
On hand s e t 2 :
Handset 2
Conference Call
00:01
D26 Mute Contact
CALL WAITING
1 . While you are engaged on an external call if another
call arrives - you will hear a beep sound and the
display is presented as screen D27 and D 2 8 . If t h e
number matches an entry in the contact list - the
name will alternate with the number on the display.
2 . To swap between two calls, press KEY_R (or KEY_R +
KEY_2 depending on your network) to speak to
second caller while your first call is put on hold.
On hand s e t 1 :
Handset 1
Call Waiting
02074030201
D27 Mute Contact
Handset 1
Call Waiting
SunCorp UK
D28 Mute Contact
KEY_TALK
Handset 1
SunCorp UK
05:30
D29 Mute Contact
3 . When second call is answered - the caller's numb e r
(or name if the number matches an entry in the
phonebook) is displayed together with the call timer of
the first call on hold.
4 . If KEY_END is pressed at any time - the line rev e r t s
back to the first caller on hold.