Wep Settings - Canon Wireless LAN Board-B2 User Manual

WEP Settings

This section describes the settings required if you selected WEP as the encryption
and authentication method in "Selecting the Encryption and Authentication
Method," on p. 2-10.
2
NOTE
You can confirm the WEP key length displayed in [WEP Key Length] on the
WEP Settings screen.
- 40bit WEP Key: displayed when a 10 digit WEP key is set.
- 104bit WEP Key: displayed when a 26 digit WEP key is set.
1
2
2-28
Security Settings
● If you want to enter the PSK using a hexadecimal number:
❑
Press [PSK Hex (64 digits)] ➞ enter the PSK as a hexadecimal number.
Enter the PSK as a 64 digit number using "0" to "9," "A" to "F," and "a" to "f."
Press [WEP Settings] on the Extension Card Settings screen.
Press [802.11 Authentication] ➞ select the 802.11
authentication method of the access point you want to
connect to.