Wpa/Wpa2-Psk Settings - Canon Wireless LAN Board-B2 User Manual

WPA/WPA2-PSK Settings

This section describes the settings required if you selected WPA/WPA2-PSK in
"Selecting the Encryption and Authentication Method," on p. 2-10.
1
Press [WPA/WPA2 PSK Settings] on the Extension Card
Settings screen.
2
Set the PSK.
NOTE
•
You cannot set [PSK ASCII (8-63 characters)] and [PSK Hex (64 digits)] at the
same time.
•
If you set the PSK, "*" is displayed on the screen.
•
If the access point you want to connect to does not support IEEE802.11i path
phrase conversion, enter the PSK in [PSK Hex (64 digits)].
● If you want to enter the PSK using a path phrase:
❑
Press [PSK ASCII (8-63 characters)] ➞ enter the PSK using ASCII characters.
2-27
Security Settings
2