If Eap-Tls Is Set As The Eap Type - Canon Wireless LAN Board-B2 User Manual

If EAP-TLS is set as the EAP type

If EAP-TLS is selected as the EAP type for the authentication server, follow the
procedure below to specify the required settings.
1
Follow steps 1 to 4 of "If EAP-TTLS or PEAP is set as the EAP
type," on p. 2-20 to set the root CA certificate and user name.
2
Press [EAP Type] ➞ select [TLS (WLAN Card Certificate)].
3
Confirm the information displayed in [WLAN Card Certificate].
If no wireless LAN card certificate is installed, 'Not Installed' is displayed.
Refer to "Installing a Wireless LAN Card Certificate," on p. 2-16 to install the
wireless LAN card certificate.
However, even if you selected 802.1X/EAP+WEP, it is not necessary to install a
certificate if it is not required.
NOTE
The wireless LAN card certificate is used as a pair with the wireless LAN card
private key in step 4.
4
Set the wireless LAN card private key.
NOTE
The wireless LAN card private key is used as a pair with the wireless LAN card
certificate in step 3.
2-25
Security Settings
2