X/Eap Settings - Canon Wireless LAN Board-B2 User Manual

802.1X/EAP Settings

This section describes the settings required if you selected 802.1X/EAP+WEP or
WPA/WPA2+802.1X/EAP as the encryption and authentication method in
"Selecting the Encryption and Authentication Method," on p. 2-10.
The procedure for specifying the settings differs according to the EAP type used by
the authentication server.
If EAP-TTLS or PEAP is set as the EAP type
2
If EAP-TTLS or PEAP is set as the EAP type for the authentication server, follow
the procedure below.
1
2
2-20
Security Settings
Press [802.1X/EAP Settings] on the Extension Card Settings
screen.
Confirm the information displayed in [Root CA Certificate].
If no root CA certificate is installed, 'Not Installed' is displayed.
Refer to "Installing a Root CA Certificate," on p. 2-13 to install the root CA
certificate.