Subscribe to Our Youtube Channel
Related Manuals for Tower Hobbies NO GRAVITY
Summary of Contents for Tower Hobbies NO GRAVITY
- Page 2 14pcs 4.Rudder 18.Adjustor 2pcs 5.Equipment canopy 19.O ring 2pcs 6.Right wing fence 20.Spinner connecting part NO GRAVITY Specification 7.Left wing fence 21.Aileron push rod 2pcs 8.Spinner 22.Wing bracings #1 2pcs 33.1 in (840 mm) 9.Fuselage foam block 23.Elevator push rod 37.8 in (960 mm)
- Page 3 NO GRAVITY Steps of ASSEMBLY 3.Install aileron servo control horn into corresponding slot on aileron, then fix with glue. 1.Install left and right landing gear into corresponding slots on fuselage, then fix with glue. 2.Insert wing into corresponding slots on fuselage, then use glue to fix. Make sure the wing without installed control horn pass through fuselage first, and ensure the wing is perpendicular to fuselage.
- Page 4 NO GRAVITY 8.Install wing bracing rod 1 and 2 on corresponding places on wing and fuselage, after make sure wing and fuselage is perpendicular to each other, fix the bracings 5.Install fuselage foam block into slot that shown in above picture, then fix with glue.
- Page 5 NO GRAVITY 10.1.Pass aileron servo wires through corresponding servo house. 13.Install the aileron pushrod, one end connected to aileron control horn, another 10.2.Fix servo arm on servo with screw. end connected to servo arm. You can adjust the length of pushrod with clips on 10.3.Place aileron servo into correpsonding servo house, then fix with glue.
- Page 6 NO GRAVITY 16. Vector system installation 16.1.Install the motor on vector system, then fix it with screws. 14.1.Remove one clip from the elevator pushrod, then pass the pushrod through the pushrod guiding tube. 14.2.Put on the removed clip on pushrod.
- Page 7 NO GRAVITY 17. If you don’t need the vector system, please read following installation steps. 17.1. Skip step 9 on how to install vector system servo. 17.2.Pass ESC through the middle part of motor mount. 17.3.Install motor on motor mount with screws.
- Page 8 NO GRAVITY Choose a Flying Field In order to have the most success and to protect your property and aircraft, it is very important to select a place to fly that is very open. Consult local laws and ordinances before choosing a location to fly your aircraft.
- Page 9 NO GRAVITY Bracings Vector system Spinner O ring Motor mount Other accessory pack Pushrod set...
- Page 10 NO GRAVITY Motor：2206 Kv1500 Servo: 8g micro servo Battery3S 400mAh 20C Li-Po ESC :10Amp...
- Page 11 NO GRAVITY...
- Page 12 NO GRAVITY...
Need help?
Do you have a question about the NO GRAVITY and is the answer not in the manual?
Questions and answers