Cisco ONS 15454 Series Reference Manual page 64

ONS_15454_Reference_Manual_R8.5.x_--_Shelf_and_Backplane_Hardware
SA-ANSI
SA-HD
OC192 LR/STM64
and
LH ITU 15xx.xx
SA-ANSI
SA-HD
FC_MR-4 and
SA-ANSI
3
MRC-12 All
MRC-2.5G-4 All
OC192SR1/STM64IO
SA-HD
Short Reach/
and
OC192/STM64 Any
SA-ANSI
4
Reach
1. The shelf assemblies supported are 15454-SA-HD, 15454-SA-ANSI, and 15454-NEBS3E.
2. DS3 card having the part number 87-31-0001 does not work in Cisco ONS 15454 R8.0 and later.
3. Slots 1 to 4 and 14 to 17 give a total bandwidth of up to 2.5 Gb/s. Slots 5, 6, 12 , and 13 give a total
bandwidth of up to 10 Gb/s
4. These cards are designated as OC192-XFP in CTC.
If an upgrade is required for compatibility, contact the Cisco Technical Assistance Center (TAC). For contact
information, go to http://www.cisco.com/tac
Table 1-32: ONS 15454 Software and Hardware Compatibility-XC10G and XC-VXC-10G Configurations
Fully Fully Fully
compatible compatible compatible
Fully Fully Fully
compatible compatible compatible
Not Not Fully
supported supported compatible
Not Not Not
supported supported supported
Not Not Fully
supported supported compatible
Fully Fully Fully
compatible compatible compatible
Fully Fully Fully
compatible compatible compatible
Fully Fully Fully
compatible compatible compatible
Not Not Fully
supported supported compatible
Fully Fully Fully
compatible compatible compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
Fully
compatible
64