ONS_15454_Reference_Manual_R8.5.x_--_Shelf_and_Backplane_Hardware
Figure 1-28: Managing Cables on the Front Panel
Fiber Management
The jumper routing fins are designed to route fiber jumpers out of both sides of the shelf. Slots 1 to 6 exit to
the left, and Slots 12 to 17 exit to the right. Figure 1-29 shows fibers routed from cards in the left slots, down
through the fins, then exiting out the fiber channel to the left. The maximum capacity of the fiber routing
channel depends on the size of the fiber jumpers. Table 1-21 gives the maximum capacity of the fiber
channel for each side of the shelf, for the different fiber sizes.
Figure 1-29: Fiber Capacity
Table 1-21 provides the maximum capacity of the fiber channel for one side of a shelf, depending on fiber
size and number of Ethernet cables running through that fiber channel.
Figure 1-28: Managing Cables on the Front Panel
41