Sharp QW-GD52I472X-EU User Manual page 20

CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
1
1.) Power On/Off Touch Button
After the Power On/Off touch is pressed, two dashes appear in the program display, until
touching any button. Touch the ''On/Off touch button'' with your fingertip for 1 sec to turn the
machin on or off.
2.) Program Touch Button
Use the Program touch button to select a suitable program for your dishes.
3.) Program Display
The program display indicates the length of the programs and the remaining time during the program
flow. You can also follow-up the selected programs by this display.
4.) Delayed Start Touch Button
You can delay the start time of a selected program from 1 to 19 hours by pressing the Delayed start
touch button of the machine. When the Delayed start touch button is pressed, "1h" appears on the
program display. If you continue pressing the delay timer touch button, the time will increment
from 1 to 19 shown on the display. The delayed start can be activated by selecting the delay time
and the desired washing program with the Program touch button. It is also possible to select the
program first and the delayed start afterwards, depending on the last value entered. To cancel Delayed
start, either select the delay timer as ''0h'', or hold the program touch button for 3 seconds. The
display will inform you how many seconds you need to hold the button by "3-2-1.." to cancel the
delay Note: If the delay touch button is pressed and held, the delay timer starts changing faster
(the rate of change is proportional to the hold pressing time). When the Delayed start touch
button is pressed for a long period of time, the counter stops at "h:00".
5.)Extra Rinse
Once you press the Start/Pause button, the programme you selected with the programme selector button will
start running and the status indicator lamp "wash" will light up. In the stop condition while wash led is On, the
Start/Pause led will blink.
6.)½ Half Load Touch Button
Using the function ½ , three sorts of washing up can be done those being lower basket, upper basket
and both baskets.
If you have a small quantity of dishes in the machine and if you have to wash them,
you can activate the semi-filling function available for some of the programs. If you have
dishes in both baskets, press the ½ key and select both lamps are lit.
If you only have dishes in the upper basket, press the ½ key and select the upper lamp
illuminated. As this will only wash items in the upper basket, make sure that there are no
items in the lower basket.
If you only have dishes in the lower basket, press the ½ key and select the lower lamp
illuminated. As this will only wash items in the lower basket, make sure that there are no items
in the upper basket.
Note : If you have used an extra feature on the latest washing program, this feature will remain
active on the next washing program until the machine is switched off and on again. If you do
not want to use this feature on the newly selected washing program, press the selected feature
button again, and check that the lamp on the button goes off.
8
2 3 4 5 6
EN-20
7