Command: imei+password
Response: 8647150022365548
imei123456
5.27 Time Setting
This setting can be used to change the time zone of your TK102-NANO.
Command: time+space+zone+password+space+local time zone e.g.
time zone123456 0
The example above can be used to set-up UK Time zone.
If your country's time zone is minus, send the code with a - symbol as shown below;
e.g. time zone123456 -4
5.28 TCP/UDP switch
Command: gprs+password,0,0
Command: gprs+password,0,1
Command: gprs+password,1,0
Command: gprs+password,1,1
5.29 Reset
This command will restart/reboot GSM & GPS modules of TK102-NANO. Please note that this
is only a hardware reboot, it will not restore TK102-NANO's settings to factory defaults.
Command: reset+password
Response: reset ok e.g.
reset123456
(example) e.g.
16
TCP with keepalive data, this is the default mode.
UDP with keepalive data
TCP without keepalive data
UDP without keepalive data