Over Speed Alarm - REWIRE SECURITY TK102-NANO User Manual

To cancel movement alarm:
Command: nomove+password e.g.
nomove123456

5.17 Over speed alarm:

To activate:
Command: speed+password+space+080
Response: speed ok! e.g.
When the speed exceeds 80 km/h, it will send the following SMS to authorized numbers every
3 minutes: "speed+080!+location" To cancel:
Command: nospeed+password e.g.
nospeed123456
5.18 SOS alarm
TK102-NANO is equipped with an SOS button. In case of emergency, pressing this button
will notify authorized numbers with three text message followed by a phone call. The SOS
alarm is activated by default and the SOS button is enabled.
To disable the SOS button:
Command: sos+password+space+off e.g.
sos123456 off To enable the SOS button
Command: sos+password+space+on e.g.
sos123456 on
5.19 Low battery alarm
Low battery alert helps users to know when the battery of TK102-NANO is low. It sends 3
notifications to authorized numbers; at %10 , at %5 and just before it's completely flat.
Low battery alert is activated by default. To activate;
speed123456 080
12
(in km/h)