Gps Blind Spot Alarm - REWIRE SECURITY TK102-NANO User Manual

Command: lowbattery+password+space+on
e.g. lowbattery123456 on
Command: lowbattery+password+space+off e.g.
lowbattery123456 off

5.20 GPS blind Spot alarm

This function is deactivated by default, to activate:
Command: gpssignal+password+space+on e.g.
gpssignal123456 on
Once activated TK102-NANO will send sms notifications to authorized numbers when it
loses GPS reception.
To deactivate:
Command: gpssignal+password+space+off e.g.
gpssignal123456 off
5.22. Standby modes
Timed standby after 5 minutes
When activated, after having no activity (call or sms commands) for 5 minutes, TK102-NANO
will change to standard standby mode; GPS module and led light will be OFF, GSM module
(phone line) will still be ON. It will wake up and turn the GPS module ON only if you call it to
request position or send an SMS command.. Please note if movement or shock sensor alarm
active this standby mode will not work.
Command: sleep+password+space+time
Response: sleep time ok e.g. sleep123456
time
Standby with shock/movement sensor
With this mode TK102-NANO will change to shock sensor standby mode after being stationary
for 5 minutes without any vibration or movement,.
To deactivate:
13