Tcp/Udp Switch; Reset; Pc Software Tracking - REWIRE SECURITY 102-NANO User Manual

e.g.
time zone123456 0
The example above can be used to set-up UK Time zone.
If your country's time zone is minus, send the code with a - symbol as shown
below;
e.g.
time zone123456 -4

5.25 TCP/UDP Switch

Command: gprs+password,0,0 TCP with keepalive data, this is the default mode.
Command: gprs+password,0,1 UDP with keepalive data
Command: gprs+password,1,0 TCP without keepalive data
Command: gprs+password,1,1 UDP without keepalive data

5.26 Reset

This command will restart/reboot GSM & GPS modules of 102-NANO. Please
note that this is only a hardware reboot, it will not restore 102-NANO's settings
to factory defaults.
Command: reset+password
Response: reset ok
e.g.
reset123456

5.27 PC Software Tracking

The free PC Software supplied with your 102-NANO can be used for both GPRS
tracking and downloading GPS Logs. Please note that if you wish to use GPRS
tracking mode with this Software, you will need to open ports from your router
and firewall for the tracker to be able to communicate with your PC. Log-in details
for the software are:
User ID: admin