REWIRE SECURITY TK102-NANO User Manual page 16

GPS module and the led light will shut off, GSM module will still be ON. As the GSM module
will be ON, you will still be able to communicate with the TK102-NANO. Vibration,
movement, calling the tracker or sending an SMS message can wake it back up. To activate;
Command: sleep+password+space+shock
Response: sleep shock ok e.g.
shock
Deep standby mode with shock sensor
When activated, after being stationary for 5 minutes without any vibration or movement, TK102-
NANO will change to deep standby mode with shock sensor.
OFF. Only vibration or movement can wake the tracker back up from Deep Sleep by
Shock Sensor mode. Once it's awake, it will automatically send a notification message to the
authorized numbers. As the GPS and GSM modules will be OFF, you won't be able to
communicate directly with the tracker. However, if you send any SMS command, it can receive
and process this command as soon as it wakes up from Deep Sleep mode.
For constant live internet tracking (GPRS), deep standby mode with shock sensor provides the
longest battery life with a single charge as the GSM module (phone line) will also be OFF.
Please note that the auto interval setting used for live tracking will override this the standby and
keep the TK102-NANO awake so GPRS economy mode should also be activated ;
Command: sleep+password+space+deepshock"
Response: sleep deepshock ok e.g. sleep123456
deepshock
Command:
Response: less gprs on ok e.g. less gprs123456 on
If there are registered authorized numbers, each authorized number will receive a notification
every time it wakes up from standby with a movement or vibration. Please use the command
below if you do not want to receive SMS notifications whenever your tracker wakes up from
deep sleep ;
Command: wake+password+space+off e.g.
wake123456 off
sleep123456
less+space+gprs+123456+space+on
GPS, GSM and led light will be