Over Speed Alarm - REWIRE SECURITY 102-NANO User Manual

Command: move+password+space+0200
Response: move OK
e.g.
move123456 0200
This will activate the movement alert with an area radius of 200 meters.
Maximum radius limit is 999 meters. In case of such a movement, it will reply
SMS "Move+ latitude & longitude" to the authorized numbers in 3 minutes
intervals.
Note: Setting the radius less than 100 meters may result in false movement
alerts. The fault alert occurs if GPS position is miscalculated due to bad GPS
reception. Inaccurate GPS reading will cause the 102-NANO to think that it is in
a different location, possibly farther from its current location, thus the processor
will accept this as a movement and trigger the movement alarm.
To cancel movement alarm:
Command: nomove+password
e.g.
nomove123456

5.15 Over Speed Alarm

To activate:
Command: speed+password+space+080
Response: speed ok!
e.g.
speed123456 080
When the speed exceeds 80 km/h, it will send the following SMS to the
authorized numbers every 3 minutes: "speed+080!+location"
(in km/h)