The Kead6.Exe Program - Hagstrom KEAD6 User Manual

The KEAD6 unit is shipped with a CD-ROM containing the KEAD6.
EXE utility program which is used for confi guring the unit. The
confi guration program allows selection of whether the channel
is to emulate a joystick axis, keystrokes, or both. Additional
adjustable parameters include defi ning the number of response
steps per channel, the keystrokes generated by each step, and
other tuning options.
Getting Started
To use and confi gure the KEAD6, follow the steps listed below.
1. Attach the KEAD6 to the computer as described on
page 2 under the section "Computer Connections."
2. Insert the CD and save the content to its own folder
on the hard drive. The CD may now be removed and
stored in a safe location for future use.
3. Open the folder that was created in step 2 and start
the confi guration program by selecting the program
fi le KEAD6.EXE.
*Note:
The programs must be copied to and run from its own
folder on the PC's hard drive. The CD itself should be reserved
for backup purposes only.
*Note:
When the KEAD6.EXE program is running, joystick
movement and keystrokes will no longer be produced by the
KEAD6 until the program is closed again. This disable mode
prevents any confl icts that may arise between the KEAD6
programmed responses and the confi guration program.

The KEAD6.EXE Program

4