Status Led Connections; The Keusb24.Exe Program - Hagstrom KEUSB24 User Manual

The KEUSB24 features a 2 x 3 header for driving the three status
LEDs for Num, Caps, and Scroll Lock. Connect LEDs as shown to
use this drive capability. No external current limiting resistors are
required as they are supplied on the board.

The KEUSB24.EXE Program

The KEUSB24 unit is shipped with a CD ROM containing the
KEUSB24.EXE utility program which is used for confi guring the
unit. Confi guration parameters include the defi ning of the I/O
pins as Rows and Columns, the keystrokes generated by the
contact closures, as well as other various options.
Getting Started
To begin using the KEUSB24, follow the steps listed below.
1. Attach the KEUSB24 to the computer as described on
page 2 under the section "Computer Connections."
2. Insert the CD and save the content to its own folder
on the hard drive. The CD may now be removed and
stored in a safe location for future use.
3. Open the folder that was created in step 2 and start
the confi guration program by selecting the program
fi le KEUSB24.EXE.
*Note:
The programs must be copied to and run from its own
folder on the PC's hard drive. The CD itself should be reserved
for back up purposes only.

Status LED Connections

4