Error Messages - Hagstrom KEAD6 User Manual

• The KEAD6.EXE program must be closed before the
KEAD6 will produce any keystrokes or joystick movement.
The KEAD6.EXE program temporarily disables the KEAD6
responses in order to prevent potential confl icts when
changing confi gurations.
• The maximum recommended cable length from the
computer to the KEAD6 is 10 feet. This distance is also
the maximum length that should be used on connections
from any potentiometer to the KEAD6 input channels.
• If using a Device ID jumper, only make changes to it
when the power to the unit is off as the jumper state is
sampled at power on or reset only.
• Before using the KEAD6.EXE program, visit Microsoft
"Windows Update" and get the latest updates for the
operating system. This step is important for making sure
the PC has the latest USB port updates.
*Note:
For any questions that are not answered in this
manual, please send us an email or call customer service. We
have customer service available from 8:00 am to 5:00 pm (EST)
Monday through Friday.
customer service email:
Toll Free 888-690-9080, or (540) 465-4677
"The KEAD6 was not found"
This error occurs if the computer cannot communicate with
the KEAD6 when trying to save to the KEAD6 or read from the
KEAD6. Check the cable connections to make sure none of them
are loose or unplugged.
"Error while reading from the KEAD6"
sales@hagstromelectronics.com

Error Messages

20