Table of Contents
Advertisement
Computer Connections
There is one USB connector located on the KEAD6. Connection
to this port can be made with power on as the KEAD6 supports
"Hot Plug" operation as a USB device.
plugged into a PC for the fi rst time, the appropriate standard
drivers are loaded by the operating system.
The KEAD6 emulates both a USB joystick and a standard USB
keyboard. The KEAD6 may be used in addition to or in place of
the system's own keyboard.
Device ID Jumper
Two KEAD6 units may be connected to
the same computer and programmed
independently. If using one unit, leave
the Device ID jumper open (factory
default). If using two KEAD6 units,
leave the jumper open on unit 1 and
closed on unit 2. This setup will present
two different USB devices to the system
that both work as USB keyboards.
When the KEAD6 is
2
Advertisement
Table of Contents
