Table of Contents
Advertisement
The KE24Load Program
The disk shipped with your unit contains the program "KE24Load"
for configuring the KE24. The program may be run from your
diskette drive, but copying the program to its own directory on a
hard drive is recommended.
Through use of this program, the user may set the number of Rows
and Columns to be scanned, response keystrokes for each input,
and other various options.
The normal course of events for configuring your KE24:
1. Start the configuration program by typing KE24Load.
2. Choose the matrix and discrete input configuration to
be used, and assign the pins according to the functions
(Row, Column, Discrete Input) that you want them to
have.
3. Program the Options for direction of the port data, baud
rate, etc (refer to page 17).
4. Edit matrix tables and your discrete input tables. Program
each input to emulate the keys you have selected for
your application.
5. Save your configuration to disk.
6. Download the configuration to the KE24.
The KE24 configuration is re-programmable, so you may
experiment and change your configuration as required. After being
programmed, the KE24 will run according to that configuration
each time it is powered up.
In certain situations a programming jumper is needed to program
the KE24. See appendix C: Placing KE24 in PROGRAM Mode.
13
Advertisement
Table of Contents
