Hagstrom KEAD6 User Manual page 9

New: Creates a new confi guration fi le by either clicking on
"New" with the mouse or by pressing Ctrl+N on the keyboard.
This option will also return the program screen to the default
settings.
Open: Recall a previously saved confi guration fi le by either
clicking on "Open" with the mouse or by pressing Ctrl+O on the
keyboard. Locate and select the name of the confi guration fi le
on the PC that is to be opened.
Save: Once a confi guration setup has been created on the
program screen, it is recommended that it be saved on the PC's
hard disk. Click on "Save" with the mouse or press Ctrl+S on the
keyboard, then choose a location to save the fi le.
Read from KEAD6: This option will read the current
confi guration in the selected KEAD6 and display it on the screen.
Click on "Read from KEAD6" with the mouse or press Ctrl+R on
the keyboard to perform this operation.
Write to KEAD6: This option will write the current
confi guration displayed on the screen to the selected KEAD6.
The KEAD6 can be programmed and re-programmed as many
times as necessary. Click on "Write to KEAD6" with the mouse
or press Ctrl+W on the keyboard to perform this operation. After
the KEAD6 has been loaded with the new confi guration, it will
scan according to this new setup upon exit from the program.
Exit: This option exits and closes the KEAD6.EXE program.
*Note:
Make sure that the KEAD6 is connected to the PC before
performing either the "Read to KEAD6" or "Write to KEAD6"
operations. If the KEAD6 is not present, a "The KEAD6 was not
Found" error will be displayed on the computer screen.
7