Low-Load Operation; Stopping The Engine - Wacker Neuson EZ38 Operator's Manual

Low-load operation

Stopping the engine

0
P
Fig. 112
OM EZ38 us 1.1 * ez38i400.fm
NOTICE
Engine damage due to low-load operation.
► Run the engine at idling speed or at high engine speed at over 20 %
engine load.
Possible consequences of low-load operation are:
• Increased engine oil consumption.
• Dirt in engine due to engine oil in exhaust system.
• Blue smoke in exhaust gas.
NOTICE
Engine damage by stopping the engine after full load.
► In order to avoid heat accumulation, let the engine run at idling speed
with no load for at least 5 minutes, and then stop it.
Turn the starting key to "0" and remove it.
1
2
3
4
4-47