Advertisement
Ca r r i e r Board
SIDE_INT (IRQ15)
Secondary IDE channel interrupt request signal.
SIDE_AK# (SDDACK#)
Secondary IDE channel acknowledge signal.
SIDE_DRQ (SDDREQ)
Secondary IDE DMA request signal.
SD80/PD80
Secondary or primary IDE channel 80-pin cable detection.
Default is SD80. (Set JP18 2-3 ON)
PD80/LWAKE
Primary IDE channel 80 pin cable detection or LAN wake up
output signal.
Default is PD80. (Set JP16 2-3 ON)
BATLOW#/SD80
Battery low input or Secondary IDE channel 80 pin cable
detection. When BATLOW# signal is low indicates an
external battery is in low battery capacity condition. This
battery low signal is not implemented on this carrier board.
Default is No connection (Set JP22 1-2 OFF).
HDRST# (IDERST#)
IDE reset signal.
other
5V_SB (VSB5)
5V Standby voltage input. This power signal is fed by ETX
Quick Installation Guide - 44 -
E C B - 9 0 1 A
Advertisement
