Advertisement
Ca r r i e r Board
ACK#
An active low input on this pin indicate that the printer has
received data and is ready to receive more.
ERR# (ERROR#)
An active low input on this pin indicate that the printer has
encounter an error.
AFD# (AUTOFD#)
An active low output from this signal cause the printer to
auto feed a line after a line is printed.
STB# (STROBE#)
An active low output of this signal is used to latch the parallel
data into the printer.
PE
An active high input on this pin indicate that the printer has
detected the end of paper.
PS/2 Keyboard and Mouse
KBDAT
PS/2 keyboard data signal.
KBCLK
PS/2 keyboard clock signal.
MSDAT
PS/2 mouse data signal.
MSCLK
PS/2 mouse clock signal.
Quick Installation Guide - 36 -
E C B - 9 0 1 A
Advertisement
