Table of Contents
Advertisement
Web Client Operation
Record
88
The blue area is the selected motion detection area.
Click Full screen or right click mouse to view the motion detection area in
full screen.
After setting the area you can Save channel or Clear the area.
Alarm output：Here you can enable alarm output channel. Please draw a
√ before the check box.
Please note if you want to set this channel as motion detection recording,
you need to turn off the schedule recording setup for this channel (Main
Menu->Setting->Schedule).
In Record tab, you can configure pre-record settings and view worksheet
state.
Figure 7-25 Record
Click Set and the following window pops up:
Advertisement
Table of Contents
