Response Code List - Omron E5AN User Manual

2.4 Response Code List

At normal completion
Response
Name
code
0000 Normal
completion
At occurrence of error
Response
Name
code
0401 Unsupported
command
1001 Command too
long
1002 Command too
short
1101 Area type error
1103 Start address
out-of-range
error
1104 End address
out-of-range
error
1003 Number of ele-
ments/data mis-
match
110B Response too
long
1100 Parameter error
3003 Read-only error
2203 Operation error
2.4 Response Code List
Description
No errors were found.
Description
The service function for the relevant
command is not supported.
The command is too long.
The command is too short.
The variable type is wrong.
The read/write start address is out of
range.
The write end address (write start
address + number of elements)
exceeds the final address of the vari-
able area.
The number of data does not match
the number of elements.
The response exceeds the commu-
nications buffer size (when larger than
number of elements 0002).
· The bit position is other than "00".
· The write data is out of the setting
range.
· The instruction code and related
information in the operating instruc-
tion is wrong.
Variable type "C0" was written to.
· The "communications
parameter is set to "OFF" (disabled).
· Writing was carried out on the
parameters from setup areas 0 to 1.
· Writing was carried out on a pro-
tected parameter other than in the
protect level.
· Writing was carried out during AT
execution.
· Processing is not possible by oper-
ating instruction.
· EEPROM error
Error
detection
priority
None
Error
detection
priority
1
2
3
4
5
6
7
8
9
10
writing" 11
2--17