Table of Contents
Advertisement
7. Pull out the optical drive bezel as shown to remove it from the optical drive.
Figure 21. Removing the optical drive bezel from the optical drive
8. Align the retaining clips on the optical drive bezel with the corresponding holes in the new optical drive.
Then, press the optical drive bezel as shown until it snaps into position.
Figure 22. Installing the optical drive bezel to the optical drive
9. Align the screw holes in the optical drive bracket with the holes in the new optical drive. Then, install the
two screws to secure the optical drive bracket to the optical drive.
Figure 23. Installing the optical drive bracket to the optical drive
.
Chapter 9
Installing or replacing hardware
93
Advertisement
Table of Contents
