Table of Contents
Advertisement
To install the ac power adapter, connect the ac power adapter to the ac power adapter connector at the rear
of your computer and a workable electrical outlet.
Figure 10. Connecting the ac power adapter
Replacing the frame stand
To replace the frame stand, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the computer cover is facing up.
.
Chapter 9
Installing or replacing hardware
87
Advertisement
Table of Contents
