Table of Contents
Advertisement
3. Align the plastic tabs on the top of the computer with the corresponding tabs on the front bezel. Then,
pivot the computer cover downward until it snaps into position and install the two screws to secure the
computer cover.
Figure 59. Installing the computer cover
4. Reinstall the frame stand. See "Replacing the frame stand" on page 87.
5. Place the computer in an upright position.
6. If there is any locking device available, lock the computer cover. See "Locking your computer" on
page 57.
7. Reconnect the external cables and power cords to the corresponding connectors on the computer.
See "Hardware locations" on page 27.
8. Update your configuration. See "Using the Setup Utility program" on page 61.
9. If a newly installed hardware component does not work normally, update the device driver. See
"Keeping your computer current" on page 54.
.
Chapter 9
Installing or replacing hardware
113
Advertisement
Table of Contents
