Lenovo 10HA Hardware Maintenance Manual page 97

6. Release the cables from the cable guides in the VESA mount bracket as shown.
Figure 16. Releasing cables from the VESA mount bracket
7. Remove the four screws that secure the VESA mount to the chassis. Then, lift the VESA mount bracket
upward to remove it from the chassis.
Figure 17. Removing the VESA mount bracket
8. Align the screw holes in the new VESA mount bracket with the holes in the chassis. Then, install the four
screws to secure the VESA mount bracket to the chassis.
Figure 18. Installing the VESA mount bracket
9. Route the cables using the cable guides in the VESA mount bracket.
10. Install the system fan. See "Replacing the system fan" on page 89.
.
Chapter 9 Installing or replacing hardware
91