Table of Contents
Advertisement
To replace the integrated camera, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Place a soft, clean towel or cloth on the desk or other flat surface. Hold the sides of your computer and
gently lay it down so that the screen is against the surface and the cover is facing up.
3. Remove the frame stand. See "Replacing the frame stand" on page 87.
4. Remove the computer cover. See "Removing the computer cover" on page 89.
5. Disconnect the cable from the integrated camera. See "Parts on the system board" on page 34.
6. Remove the screw that secures the integrated camera bracket. Then, lift the integrated camera bracket
upward to remove it from the LCD front bezel.
Figure 48. Removing the integrated camera bracket
7. Lift the integrated camera upward to remove it from the integrated camera bracket.
Figure 49. Removing the integrated camera from the bracket
106
Lenovo S200z Hardware Maintenance Manual
Advertisement
Table of Contents
