Table of Contents
Advertisement
Trouble Shooting
If the following window (Figure 11) opens after starting the ALP software, double check the hardware setup.
Figure 11. Analog LaunchPAD No Devices Error
It may also be that the USB driver is not installed. Check the device manager. There should be an "NSC ALP
Nano Atmel" device under the "Universal Serial Bus Controllers" as shown below in Figure 12.
Figure 12. Windows XP, Analog LauchPAD USB Driver
SD303/SD307 EVK User Guide
16 of 27
Rev 1.2
© 2010, National Semiconductor Corp.
Advertisement
Table of Contents
