Table of Contents
Advertisement
Figure 6. LMH0307 Registers Tab
Each register can be examined in detail by either double clicking on the desired registers fold bar (with the address
and the register name, e.g. 0x00 – ID) or by single clicking the icon at the right of the fold bar (two inverted carats).
The Refresh button will re-read the currently selected register and the Refresh All will read all registers in the
device. Changes may be made to the registers by checking or un-checking the individual register bits or typing in a
new register value in the Value field. After setting the appropriate register value, the Apply button must be pressed
to apply the changes. The detailed view of the STATUS register is shown in Figure 7 with Verbose Descriptions
checked and Figure 8 with Verbose Descriptions un-checked.
SD303/SD307 EVK User Guide
12 of 27
Rev 1.2
© 2010, National Semiconductor Corp.
Advertisement
Table of Contents
